section

Italiano Deutsch Français Español

CABER IMPIANTI S.r.l.

via Rivera, 69
20841
CARATE BRIANZA (MB)
ITALIA

P.Iva 00744410960
Tel. :
+39 0362 805 492 ra
Fax. :
+39 0362 804 094
email:
info sep caberimpianti punto it

Privacy Policy

Logo Caber Impianti Caber Impianti industrial washing machines

Industrial scroll washing machines

The scroll washing machines are particularly suitable for the cleaning of small cupped metal parts. The scrolls slow rotation speed allows a continuous movement of the parts under the sprays nozzles, this tumbling action ensuring that all areas of the product are cleaned to a high standard.

These machines represent probably the best washing solution economically and technically in today's market place, whereas the pieces can touch each other without get damaged.

Scroll washing machines are utilized in many areas of industry in particular with regards to the fastener and bolt trades, sanitary fittings, etc.

Caber Impianti s.r.l. produce 80 different standard models of scroll washing machines ranging from 200mm up to our largest at 2000mm diameter covering a wide range of customer requirements for washing.

Cabers technical staff with the customer's product samples and production requirements can decide on the best washing solution. The machines can have either a single tank with drying for processes such as, Transfer machines, lathes, cold stamping machines, rolling machines, etc, additional tanks can be fitted for higher cleaning quality.

All models can be equipped with accessories, such as mineral oil separators, centrifugal condenser, neat tramp oil separators filtering systems, steam dissipaters and many others more.
Washing machines in particularly the medium to large ones can be equipped with automatic loading-unloading systems controlled via PLC to assist with operator input or even unmanned operation. A bar-code recognition system can be used for identification of production batches, the reading of the bar-code automatically changes all parameters of the Cycle allowing ease of use by the operator who only has to load the wash system and monitor production throughput.

Modem interface allows Caber to be more efficient in their response to customer problems and reduce downtime.

Industrial scroll washing machines:
Mod. 230/S - serial production

Scroll washing machine equipped with wheels for ease of movement, typically used with transfer machines using emulsions
Production output of 100 kgs per hour.

The base model here shown can be fitted with several accessories such as oil separator, linear vibrating hopper, filtering system and automatic feeding, etc.
The small friendly compact size of this machine with regards to footprint and the excellent relationship between price and quality coupled with its simplicity to use have made this model a most successful answer to today's production needs with more than 5000 units build worldwide.

Industrial scroll washing machines: Mod. 230/S
Industrial scroll washing machines: Mod. 230/S, serial production

Industrial scroll washing machines:
Mod. 249

Mid-small sized washing machines suitable to wash components continuously after cold-printing machines.

Output: 700 kg/h.

Industrial scroll washing machines: Mod. 249

Industrial scroll washing machines:
Mod. 280

Double stage- scroll washing machine for caoutchou socket-joints.

Scroll ø 800 mm. The plant is functioning in Germany.

Industrial scroll washing machines: Mod. 280

Industrial scroll washing machines:
Mod. 330/SS

Washing machine similar to the Mod 230/S, but equipped with two tanks and a drying section.
Suitable to clean small metal parts contaminated with dirty mineral or soluble oils.
Production output of 200 to 250 Kgs per hour of small metal parts.

Industrial scroll washing machines: Mod. 330/SS

Industrial scroll washing machines:
Mod. 349

Small-medium sized washing machine equipped with two tanks and a drying section.
Suitable for cleaning small metal parts contaminated with dirty mineral or soluble oils.
Maximum Production output of 700 Kgs per hour.

The machine shown here is working in a factory in France.

Industrial scroll washing machines: Mod. 349

Industrial scroll washing machines:
Mod. 349

Scroll washing machine for cleaning, rinsing and drying special fasteners. Performance  in AISI 304. Output about 350 kg/h.

This model also is working in France.

Industrial scroll washing machines: Mod. 349

Industrial scroll washing machines:
Mod. 360

Washing machine equipped with two tanks and a drying section.
Suitable to clean small metal parts contaminated with dirty mineral or soluble oils.
Maximum Production output of 1200 Kgs per hour.

The machine shown here is working in a factory in Poland.

Industrial scroll washing machines: Mod. 360

Industrial scroll washing machines:
Mod. 380

Medium sized scroll washing machine equipped with two tanks and a drying section.
Suitable for cleaning small metal parts contaminated with dirty mineral or soluble oils.
Maximum production output of 2000Kgs per hour.

The machine is working in a factory in France.

Industrial scroll washing machines: Mod. 380

Industrial scroll washing machines:
Mod. 460

Mid-sized washing machine equipped with three treatement tanks besides drying. Heated by natural gas burners.

Output: 1200 Kg/h.

The machine is now working in a factory in Germany.

Industrial scroll washing machines: Mod. 460

Industrial scroll washing machines:
Mod. 480

Scroll washing machine for dephosphatizing of steel rivets with degreasing, dephosphatizing, rinsing and drying cycle. Performance in AISI 304.

Machine functioning in Holland.

Industrial scroll washing machines: Mod. 480

Industrial scroll washing machines:
Mod. 490

Big-medium sized washing machine suitable for washing, dephosphatizing, rinsing and drying treatmentsfor fasteners and general small metal components. Heated by natural gas.

Output: 2000 Kg/h.

The machine is now working in a factory in Germany.

Industrial scroll washing machines: Mod. 490

Industrial scroll washing machines:
Mod. 580

Medium to large sized scroll washing machine equipped with four treatments stages besides drying.
Suitable to clean small metal parts, contaminated with dirty mineral or soluble oils.
Maximum production output of 2000 Kgs per hour.

The machine is working in a factory in Italy.

Industrial scroll washing machines: Mod. 580

Industrial scroll washing machines:
Mod. 580

Dephosphatizing washing machine positioned at the top of a thermic treatment for bolts, capacity 1500 kg/h.

Machine working in Germany.

Industrial scroll washing machines: Mod. 580

Industrial scroll washing machines:
Mod. 4100

Big sized washing machine equipped with three treatments tanks and drying. Suitable for washing and dephosphatizing of fasteners dirty og mineral oils and phosphates.

Output: 2500 Kg/h.

The machine is now working in a factory in Czech Republic.

Industrial scroll washing machines: Mod. 4100

Industrial scroll washing machines:
Mod. 4127

Special to Caber is their standard production of this machine produced in many different styles and exported all over the world to countries such as, France, Germany, U.S.A, Spain, Korea, etc.
These plants can be equipped with automatic loading/unloading and are controlled by a PLC with bar code recognition for identification of different production batches.
Production output of 3000 Kgs per hour.

The machine shown here is working in a factory in Spain.

Industrial scroll washing machines: Mod. 4127
COPYRIGHT 2006-2017 - Caberimpianti Srl. All rights reserved